Vocal Tips For recording vocals in cubase

Vocal Tips For recording vocals in cubase

Vocals are often the most important element of a song, but for a producer the vocal track is also the most problematic.

Vocal Processing Tips
With a vocal track its important to get the best possible performance, using the best possible microphone and preamp. This is a whole other topic, so for now I’ll just assume we already have a recorded vocal take to work with, flaws and all.

The first stage in processing is to remove any unwanted noise/frequencies. This can be done with a noise gate, de-esser, filtering and/or EQ.

Vocal Tip 1 – Filter/EQ
Generally speaking, a vocal will have little or no information below 100 Hz (see this frequency chart for details), so a high-pass filter to cut out this range is probably a good idea. You can even raise the threshold further if you’re dealing with a female vocalist. Most DAWs have their own native EQs so you should be able to do this rather easily.

Vocal Tip 2 – Noise Gate
A noise gate cuts out the spaces where the vocalist isn’t singing, and acts in a similar fashion to a compressor. You’ll need to set up the attack and release times so that the effect works
well with the timing of the singer.

Vocal Tip 3 – De-Esser
A de-esser is usually required to take out those intrusive plosives and ‘ess’ sounds, although you might get by without one if the singer knows how to work the microphone (don’t forget to use a pop shield).

Vocal Tip 4 – Compressor
Now that most of the bad stuff has been cleaned up, it’s time to look at controlling the dynamics of the recording. As usual, compressors are the order of the day – sticking with the excellent Digital Fish Phones freebies, we can use cubase's vintage compressor to even out the levels in the performance, creating a smooth vocal that doesn’t have any annoying dips or spikes in volume.

Vocal Tip 5 – Reverb
At this stage, we can consider applying some reverb. Tread with caution here, as it’s easy to overdo – reverb should be barely audible, just enough to blend and pad the vocal slightly.

Vocal Tip 6 – Adding Depth
If you need some extra processing beyond the basics outlined above, then you might want to consider cubase's stereo image plugin for some tape saturation, Cubase studio Chorus for a taste of chorus fattening, or the Limiter for bringing up the levels a bit more.